HomePosts Tagged "how to waterproof matches"

Waterproof matches are expensive, but you can make your own for only a fraction of the price.

Today’s featured video is from YouTuber’s JoeandZachSurvival and they share a simple but effective way to waterproof your matches. As preppers we spend a fair amount of time talking about cooking when the grid goes down and there are numerous ways to start a fire out of natural materials, but I think having a lighter or matches is just easier.

I personally have a firesteel for times when I don’t have a lighter but unless I want to practice making a fire, I will go the easy route and just light that Bic or strike a match.

When it comes to packing fire making materials in my Bug Out Bag or even just stocking up my supplies, lighters and matches are something I don’t leave out.

You can purchase a few packs of Bic lighters and throw those in a plastic tub and they will last for a very long time. Matches, may last even longer and if you take steps to protect them from the elements, you can use these in a lot of situations.

In this video, Joe and Zach show you how to make waterproof matches easily that can save you a little money. Hope you enjoy!

What do you think? If you’re curious to find out 4 other ways to waterproof your matches, there’s more.

Listed below are a number of effective and proven ways to make waterproof matches you can use for camping, backpacking, and emergencies.

Note: All the methods below involve some risk. If you are a minor, do not carry out any of these activities without the permission of a competent adult supervisor. The list is ranked from safest to least safe. The best and safest method is to use turpentine. (Turpentine has a higher “flash point” relative to acetone, which is commonly used in nail polish and does not involve the use of flame as is needed in the Wax or Paraffin methods.)

Method One of Four: Use Turpentine

Image titled Make Waterproof Matches Step 1
1. Pour 2 to 3 large tablespoons of turpentine into a small (tumbler sized) glass.
Image titled Make Waterproof Matches Step 2
2. Place the matches, (head down) into the turpentine and allow the matches to soak for 5 minutes. During that time the turpentine will soak into the head as well as the stem. All the water will be driven off by the turpentine.
Image titled Make Waterproof Matches Step 3
3. Remove the matches and spread them out to dry out on a sheet of newspaper.Generally, 20 minutes for excess turpentine to evaporate is recommended. Matches treated in this way remain waterproof for several months or longer.

Method Two of Four: Use Nail Polish

Image titled Make Waterproof Matches Step 4
1. Dip the head end of the match into clear nail polish far enough to cover at least an eighth of an inch (3 millimeters) of the stick below the head.
Image titled Make Waterproof Matches Step 5
2. Hold the match for a few seconds to allow the polish to dry and then place the match on a table or counter so that the head is suspended off the edge of the surface.
Image titled Make Waterproof Matches Step 6
3. Place a sheet of newsprint below to catch anything that may drip off.

Method Three of Four: Use a Candle

Image titled Make Waterproof Matches Step 7
1. Light a candle and let it burn down until you have a good amount of liquid wax (about a half of an inch or 1 centimeter).
Image titled Make Waterproof Matches Step 8
2. Extinguish the candle.
Image titled Make Waterproof Matches Step 9
3. Dip the head end of the match into the wax far enough to cover at least an eighth of an inch (3 millimeters) of the stick below the head.
Image titled Make Waterproof Matches Step 10
4. Hold the match for a few seconds to allow the wax to harden slightly and then place the match on a table or counter so that the head is suspended off the edge of the surface.
Image titled Make Waterproof Matches Step 11
5. When the wax has cooled, but not completely hardened, pinch the end of the wax coating (towards the stick), forming a tight seal.

Method Four of Four: Using Paraffin Wax

Image titled Make Waterproof Matches Step 12
1. Melt enough paraffin wax in a double boiler to be able to coat with wax about a half of an inch (1 centimeter) deep.
Image titled Make Waterproof Matches Step 13
2. Wrap some twine or jute string around several matches from the bottom, to just below the wax quickly. 
This makes a torch that can burn for 10 or more minutes.

On a different note, here’s some other self-sufficiency and preparedness solutions recommended for you:

The Lost Ways (The vital self-sufficiency lessons our great grand-fathers left us)
Survival MD (Knowledge to survive any medical crisis situation)
Backyard Liberty (Liberal’s hidden agenda: more than just your guns…)
Alive After the Fall (Build yourself the only unlimited water source you’ll ever need)
The Lost ways II (4 Important Forgotten Skills used by our Ancestors that can help you in any crisis)
The Patriot Privacy Kit (Secure your privacy in just 10 simple steps)

Waterproof matches are expensive, but you can make your own for only a fraction of the price. Today’s featured video is from YouTuber’s JoeandZachSurvival and they share a simple but effective